-
#### Description
Breakout should be supported on DELL S5248F but it is not working.
#### Steps to reproduce the issue:
1. Run `show interfaces breakout`
2. Get error: `Invalid JSON file format…
-
### Bug Description
We are using Dell Powermax on openshift. We were using Dell CSI Operator 1.12.o, currently installed Dell CSM Operator 1.5.1
The operator sucessfuly installed and we wanted to …
-
I have the latest version of xcp-ng 8.3 but the smartctl dosent appear in my plugins list and i have this error in loop in the logs.
[2024-08-20T19_57_27.049Z - XO.log](https://github.com/user-attach…
-
Currently, the smartctl plugin doesn't work with a Dell hardware RAID controller. In that case, the `smartctl` command will return:
```
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.19.0+1] (local…
-
Can I do this procedure on Dell T5810?
-
Error: During XCP-NG 8.3(RC1) installation, at around 50% mark, this error appears:
failed to add new efi boot entry, No space left on device.
Resolution: Install using alt-kernel, I did read onli…
-
Hi,
We are using the Dell/EMC PowerVault ME4 plugin version 3.3.1 with the latest Checkmk Raw Edition 2.3.0p10 extensions.
It does not allow us to check the "Parameters for this service" page. E…
-
Does this project support the Dell G15 5530?
-
Not too surprising, these devices are very similar. I think they even use the same BIOS.
Recommend replacing `GROUP="plugdev"` with `TAG+="uaccess"`. This is [best practice](https://wiki.archlinux.…
-
BetterDisplay has a nice UI, would be nice for it to support Dell's PIP/PBP out of the box rather than having to resort to custom DDC commands with #2300