-
Hello
I am trying to create a device tree for a SPI slave device for Linux OpenWRT 6.6.58, my SPI device will be interfaced to Lima module
via SPI. I have used "target/linux/ath79/dts/qca9531_8de…
-
Can you provide device tree for Realme C35?
Can you provide vendor tree for Realme C35?
-
An alternative solution than making a full replacement trees is to keep the upstream vanilla tree and apply Overlays to it at boot time.
An initial start has been made on the branch `overlays`:
…
-
https://www.raspberrypi.com/documentation/computers/configuration.html#device-trees-overlays-and-parameters
To reproduce:
1. Make a fresh install of Raspberry Pi OS Lite 64 bit
2. `sudo apt ins…
-
Description: There is an issue in the Zephyr Device Tree configuration for STM32G0 series UART peripherals. Specifically, the interrupt numbers for UART4, UART5, and UART6 are assigned the same interr…
-
Hello @lopestom,
Like I said this is another device tree. I feel like it's more complete and better organized than the other device tree was (although I'm very sure that changes can and may need to b…
-
## Device you want to apply for
```
Xiaomi Mi 9 (cepheus)
```
## Email address
```
tribual@web.de
```
## Device tree sources
```
https://github.com/tribual/device_xiaomi_cepheus/tree/1…
-
* [ ] Add UEFI Platform / Rename `Multiboot` platform to `BareMetal`
* [ ] Move Multiboot detection to loader
* Paging issues
* [ ] Move memory detection to loader
* Add `&'static [MemoryRegio…
-
Kernel error while trying etimer driver.
used etimer_demo from nuc980bsp/application/demos/etimer/
device-tree and output in files
[console.txt](https://github.com/user-attachments/files/17903421/c…
-
Zephyr has a LED driver https://github.com/zephyrproject-rtos/zephyr/blob/main/drivers/led/led_gpio.c which is suitable for single LEDs. There is however (IMHO) no good way to handle RGB leds.
**De…