-
Have you done any work on or have an interest in updating the Eleksmaker extensions for Inkscape 1.0? Specifically, the hatch.py has incompatible code with v1.0 preventing the extension from executin…
-
Ok, Houston, we have a problem.
I order a second minilaser diode for fabmob but I was not please with the first one and I order the same used by bemaker this time. The machine is arrived, it's mou…
-
My problem is that with eleksmaker I am getting alarm from Z-switch even thought I have tried to configure the software to use only a X and Y limit switches. Below more detailed information and questi…
-
At the moment you need 9V minimum to supply the syringe with enough power to fully melt the wax
-
Is there any plans to add a spindle/laser driver circuitry to the board? The reason I ask is that it could be made into a drop-in replacement for the standard Grbl boards that are used on the deskto…
-
I successfully flashed my laser engraver with laser grbl to 1.1f on a machine I just put together. It is a 6550 laser engraver could be an eleksmaker model. I purchased it a while ago, have no origi…
-
Hi All,
I have read through multiple threads but it seems that I'm reporting something new/unseen so far.
My Setup is Eleksmaker Mana SE v3.2 + grbl1.1g, I have upgraded X - Stepper Driver, and …
-
- [ ] ref to file .md or pullRequest #: .................................................
*(à remplir quand l'issue est résolue)*
## contexte
We are using the Windows operating system at the mome…
-
I have successfully tested the Octopi image on a raspberry pi controlling GRBL on an Arduino Nano. I followed the instructions on the [fabricatable machines repository](https://github.com/fellesverkst…
-
Run http://smoothieware.org/console-commands#config-get for the laser_module parameter (if true, its a laser) also could probably check for extruders if found, is a 3d Printer. Check for a Spindle co…
ghost updated
7 years ago