-
Problem: Flaps or ailerons up or down in the same direction
Flight phase: thermal, speed, landing
How can I reverse a control surface to adjust the control surface deflections in the same directio…
-
A common scenario (at least for gliders), is to have a 4 servo wing, 2 for aileron and 2 for flaps.
It is also common to have 'dual rates' on the ailerons which can be done via the Weights / Rates p…
-
-
The results entries keep duplicating and un-duplicating in `progress -M` output every few seconds.
Homebrew, Catalina.
Please use a hashmap keyed on pid, to ensure that only one entry appears in…
-
This is with 30a276f3c144b3f1b2eba25d9b2bdc0a1cd6049a on CentOS 7 (running 3.10.0-1127.19.1.el7.x86_64)
```
[root@vultr local]# ip link add type veth peer veth2
[root@vultr local]# ip link set ve…
-
Hi
I have a problem
on my bushmaster a plane with ailerons and flaps with eacht wing 2 serovs to control them
with switch SC up i have normal ailerons and normal flaps ons slider RS.
With Swit…
-
```
Add Flap input and output channels.
Add code to allow mixing a flap value into ailerons when FLAPERONS are enabled.
Possibly add an F_FLAPS flag to allow automating the addition of a configurable …
-
```
Add Flap input and output channels.
Add code to allow mixing a flap value into ailerons when FLAPERONS are enabled.
Possibly add an F_FLAPS flag to allow automating the addition of a configurable …
-
```
Add Flap input and output channels.
Add code to allow mixing a flap value into ailerons when FLAPERONS are enabled.
Possibly add an F_FLAPS flag to allow automating the addition of a configurable …
-
```
Add Flap input and output channels.
Add code to allow mixing a flap value into ailerons when FLAPERONS are enabled.
Possibly add an F_FLAPS flag to allow automating the addition of a configurable …