-
Used the raspberrypi imager and set the SSID and PW correctly.
I checked the wpa_supplicant files in /etc/wpasupplicant/ and in /boot/fluiddpi-wpa-supplicant.txt and both are showing the correct ss…
-
Something is happening causing mjpg-streamer to be compiled without the input_raspicam plugin due to unmet dependencies. If I had to guess, something changed with the location of /opt/vc/include that …
-
### Is your feature request related to a problem? Please describe
I'd like to have bookmarks in my browser that lead me directly to the right printer in the Fluidd visualisation. I'm running 2 printe…
-
mkspi.local is not working.
In the same computer, raspberry model 3 works fine with fluiddpi.local
Tested on 2x computer and iphone with same results
-
Would you be interested in making the FluiddPi image a readonly filesystem? Would make things less error-prone on powerloss or people pulling the plug without shutting down and also not wear down the …
-
I have followed every guide there is to get this to work and still with no luck. I did all the troubleshooting from the amazon page. I am able to compile using the make command, copy the file to the P…
-
The error persists on the display. I don't know where to write. The display will be streaked if I wake up. Sometimes the image flickers as you live. Resolution cannot be selected after using the raspi…
-
This is what I did to get my PiCam working in fluiddPi.
1. `raspi-config`
2. choose "3 Interface Options"
3. choose "I1 Legacy Camera"
4. Enable
5. Finish raspi-config and reboot
Now PiCamer…
-
### Browser
Chrome
### Device
Other (Please tell us below)
### Operating System
Linux
### What happened
From time to time (usually every few hours, sometimes it lasts longer, for maybe 12 hours…
-
Board flashed firmware fine. I connected 24v power, and all of the stepper/fan/endstops, and now it will not connect again. I have reflashed, I have remade my RaspPi's os. I have tried every usb port …