-
A Frequency Calculator is used to calculate the frequency(f) using the Time Period(t), Wavelength (y), Wave Speed (v) and Angular Frequency(w).
The Formulas that used:
1. f = 1/t
2. f = v/y
3…
-
Hi everyone.
I use the spectral integration quite a bit and it would be nice to have SAC's divomega in the toolkit. It is possible to add?
https://ds.iris.edu/files/sac-manual/commands/divomega.h…
-
Im running a ros2 node reading and writing in parallel (optimized for minimal data) on four loops. However, the data transmission speed of the fastest loop is limited to 1000hz (also if the plc is run…
-
At the moment, it is very cumbersome to set frequencies of multiple devices, especially with higher frequencies since the frequency selector cannot be edited directly. It takes a long time to reach th…
-
currently it seems to be 1s hardcoded
fvogl updated
4 hours ago
-
Hello,
I am looking to see if there's a way to adjust the variant allele frequencies (VAF) in mosaic mode to detect below 5%?
-
firstly, thanks for your work on this subject.
I was looking to replace the PCM5102a with a better dac. I noticed that the STM32F411xE configuration could provide the masterclock. what would the fre…
-
Hello, would it be possible to add the following frequencies for the new training mission?
Land/Launch
Departure
Strike
Red Crown
Approach Alpha
Approach Bravo
Airwing Common
Squadron Common (…
-
### Boards
AMB82-Mini
### External Hardware
NONE
### Hardware Configuration
Using PWM
### Version
latest dev (checkout manually)
### IDE Name
Arduino IDE 2.3.2
### Operating System
Windows
…
-
Hi the Frequency display in sm2 does not follow the radio for me.