-
Hello.
First I want to thank you for your work, I really don't understand why these values are not exposed to modbus registry and the only way to change them is via web browser.
It seems that afte…
-
As discovered [here](https://www.photovoltaikforum.com/thread/165641-gen24-sw-1-17-2-1/?postID=2502035#post2502035) there seems to be a new api under http:///components/readable where the GEN24 web in…
-
Basically, I have two Symo Inverters with two different IPs
As long as I enter one IP or the other, everything is fine.... for one inverter at a time
I must do something wrong with the scope... shou…
-
### The problem
After adding the fronius component, only one inverter is visible.
Both are visible in the Datalogger Web (Firmware: 2.0.5-4)
Inverter 1: IG 35 Plus -> Not in HA
Inverter 2: IG 50 P…
-
HI,
I have a fronius TL4.0 inverter with a datalogger unit. I discoverd the messages from the datalogger unit can be retreived with:
``/solar_api/GetInverterRealtimeData.cgi?Scope=System``
So I r…
-
### The problem
After working perfectly until the beginning of January 2023, the fronius integration (energy) does not show the statistics data needed to configure the energy panel in Home Assistant …
-
### The problem
If Home Assistant is restarted during a period when the inverter does not produce any power, its entity is shown as unavailable and it is staying unavailable, even when solar producti…
-
### The problem
After adding the fronius integration the device "Datalogger Web" will be discovered.
The issue is the unit_of_measurement. This will be shown as an encoded unit
![image](https://us…
-
### The problem
Hi!
My energy_total_fronius_inverter_... sometimes has enormous (downwards) peaks:
![image](https://user-images.githubusercontent.com/64225823/191751262-ebd8fa20-bbeb-4eaa-abaa-61…
-
Thank you for that nice module.
First, TOTAL is showing - kW instead of mW
Second, Total calculation is wrong. It shows 4,48 KW but it should be 16,13 mW
![Screenshot 2022-03-15 at 18 20 49](http…