-
如题,FX3U的通过串口编程协议来读写X,Y,M,D寄存器吗?
-
When trying to connect to the fx3ge, fx3u or fx3u-enet-adp plc via udp protocol, the gx work 2 software requires a destination port, consequently the communication node shows timeout, reading the libr…
-
FX32能够连接成功,但是读写数据出错,我尝试使用Version.None也不可用。
不管是读取M0 Boolean变量,还是D0的word变量
![image](https://user-images.githubusercontent.com/19402747/123578173-d4b5ff80-d807-11eb-97da-aa2320ebab13.png)
-
Hallo, ist es möglich die GPIO´s anders zuzuordnen?
Ich habe eine fertige SPS Platine ( FX3U-56MR) mit dem STM32F103VCT6 diesen habe ich bereits soweit das ich den Code aufspielen kann. Leider stimm…
-
Hello,
I'm using your driver, I really appreciate it.
I did little implementation and I use a workaround because I suffer a small memory problem (I restart the process every minute, i'm continuosly …
-
Hey, I can set up the connection with the device on an specific ipadress and port (5556).
However,
I get an error mentioning 'Timed out' as can be seen from the screenshot
My code is displayed a…
-
Every time I set connection parameters NodeRed crashes.
When I restart service, everything works as expected.
Some info for debugging - from start of node-red to crash, when I changed setting of c…
-
Hi,
Thanks for the library, for FX series PLC's.
I am trying to connect with the PLC, but i am unable to connect. My PLC is FX3U and FX5U. I am using python script similar to provided by you in …
-
Hi,
I can confirm I was able to use this node also to communicate with FX3U PLC. I didn't do a stress test.
I use these settings:
-FRAME: 1E
-PROTOCOL: TCP
-PLC Type: A
These settings are not …
-
Hello,
I tried to connect FX-5U with mcprotocol. (With default ethernet configuration)
Connected but timeout occured. (Port 1280 used)
When I try to add SLMP and port 1281 connection refused.
What…