-
Hi! I would like to ask, what are the soft reset commands for resetting or stopping each axis in the keyboard plugin? Or are there some hidden instructions?[https://github.com/grblHAL/Plugin_keypad](…
-
I'm somewhat disappointed with the lack of comments the code. Specifically related to the GrblHAL drivers. One of the reasons that I love Grbl, is that the code is very well commented which makes it …
-
Hi, I am trying to use the PicoCNC board with the RP2040 for a DIY plasma cutter and am trying to get THC working. The analog input will be the ADC on GPIO28, moving the probe pin to 24. I also ordere…
-
Good morning, I tell you that I changed the code, it compiles but does nothing else I remain attentive thanks
![rgb](https://github.com/grblHAL/Plugin_fans/assets/32020092/671bcf47-af47…
-
Is it possible to add / create a plugin that allows the use of an ESP32 Module (in Slave mode) to add Wi-Fi / Bluetooth functionality via the SPI port?
Regards
George
ghost updated
6 months ago
-
I try to build a Plasma cutter with a STM32F411 "blackpill" .
It skd looks like working a bit, but does not really match the expectations from documentation and source code.
The pattern is similar…
-
Hi Terje Io
after the Stepper Spindle do you intend to write a plugin for AC Servo controlled in Modbus to be used as a spindle? I attach you manual (see Chapter 9) and a code for Arduino Nano as an …
-
Hello,
I wanted to update my machine from a version from 2021, but when I try to compile the code with Arduino IDE 1.8.13 I get the following Error. I can't flash my Teensy 4.1 Board.
When I disab…
-
ioSender 2.0.42 I don't know if this should be reported in grblHAL or ioSender Issues. Please forgive if misplaced.
In SD Card panel, right click on valid GCode file, select Download and Run
It…
-
Hi @terjeio , would it be possible to add plugin for Nextion displays ? [https://nextion.tech](https://nextion.tech)
I mean something like when you press a button it sends a Gcode command to serial.p…