-
I grabbed a HV Programmer to play around with some fuse settings and I'm having an issue with one particular chip. It's a attiny424. It will not program with pymcuprog in HV mode. I can read/write fus…
-
Great range of HV UPDI programmers. Only thing is that you use the CH330N which seems to be discontinued.
Is there a replacement chip?
Will you be updating the designs for a new chip?
Better yet,…
-
As described in datasheet of ATTiny3216, it is possible to make hardware reset with low voltage, but configuration must be enabled by fuse.
On menu UDPI, i have only "No Reset" or "reset enabled for …
-
I'm having issues when trying to program an ATtiny424 using a high-voltage (HV) programmer. Programming and setting fuses work perfectly without the HV programmer, but I want to experiment with some f…
-
For those of us that don't want to modify it, but "just drop it in and go", it would be nice to have something that is already known to work with a standalone programmer.
I can export a hex file fr…
-
This programmer https://www.tindie.com/products/leonerd/avr-updi-programmer-with-12v/ is implementing a 12V HV enable pulse, by RTS handshaking line being asserted when the serial port is opened.
But…
-
Well, I have no idea where else to go. I bought a brand new ATTiny from Mouser and it seemed to come locked. So I tried to unlock it by erasing it (`-e` or `-e -F`), which just gave me the error here:…
-
Hi Folks,
Can anyone help me with following error screen shots?
Setup TTL to uart converter: CH340G
TX connected to RX with 4.7K connected to UPDI (PIN6)
VCC of UART & ATT402 shorted to 5V
GN…
-
The page:
https://github.com/SpenceKonde/AVR-Guidance/blob/master/UPDI/jtag2updi.md
is a bit daunting for someone just wanting to get UPDI to work with DxCore or megaTinyCore.
It's great to h…
-
このページは気がつくと更新されます。
It's written frankly, so even if it's automatically translated into English, it might not come across correctly.
進行中
- 古い設定ファイルを食わせると互換性がなくて segmentation fault
- https:/…