-
Hi,
I'm using the latest version of Home Assistant, 2024.6.4 and the latest version of this card 5.2.0.
I have the below card config and the behaviour I'm expecting is:
- In normal operation, t…
-
### Checklist
- [X] I have updated the card to the latest version available
- [X] I have cleared the cache of my browser
- [X] I have checked if the problem is already reported
### The problem
I am…
b-per updated
15 hours ago
-
### Checklist
- [X] I have updated the card to the latest version available
- [X] I have cleared the cache of my browser
- [X] I have checked if the problem is already reported
### The problem…
-
**Issue:**
When there has no card-condition, one camera offline won't break the card, the offline card will either be displayed as black or as an image; Below YAML have card-condition refer to a car…
-
I am unable to get a livestream of the e340 doorbell working.
I lowered the quality to the lowest available. Setup WebRTC Camera intergation by installing in HACS first then setting integration.
…
-
Hello and great project you have here.
I was working through the steps with a cheap Micro Center "AQIA 1080p Indoor Camera" TuYa just wanted to mess with it and maybe get some kind of RTSP/ONVIF. Ins…
-
**Checklist:**
- [x] I updated to the latest version available
- [x] I cleared the cache of my browser
**Release with the issue:**
5.2.0
**Last working release (if known):**
Probab…
-
### Checklist
- [X] I have updated the card to the latest version available
- [X] I have cleared the cache of my browser
- [X] I have checked if the problem is already reported
### The problem
I am…
-
Hello, Firmware up to date, card, formatted in the camera. Made bootable under Linux (Ubuntu) according to the procedure in your tutorial. Hack copied to the root of the card. When I put it back in th…
-
use the [Cameratrap DP Format](https://camtrap-dp.tdwg.org/data/) and get image data properly integrated.
Methods
### Internal only
Set up new Deployment using tkinter
- Enter the camera ID,…
nkwsy updated
3 weeks ago