-
In English, on the web, we do not add capital letters for each word for titles or buttons. ionogram data, Learn more about Alouette, Ionograms selected / Total number of ionograms, Select data,…
-
Can you increase the ability to receive chirp signals to plot ionograms ?
Just like http://websdr.ewi.utwente.nl:8901/chirps/
thank you very much
-
Hi,I'm using a receiver x300 and ubx with 12.5MHz center frequency, 25MHz sample rate and GPSDO.
thor.py -m 192.168.10.2 -d "A:0" -y "TX/RX" --clock_source 'gpsdo' --time_source 'gpsdo' -c ch1 -f 1…
-
As described, the data extraction method occurs in two stages:
1. To run the old data extraction algorithm
2. To apply the new text recognition stage to read NUM2 metadata.
The algorithm should…
-
Use earth_mid.py and a typical ionospheric F2 height of 300 km to draw two lines between stations that demonstrate a one hop skip.
-
This will enable tracking the progression of the maximum usable frequency vs the QSOs/spots from the Rockmite.
-
The ground station filter does not work properly. Some stations work (e.g. Ottawa, Kashima) whereas other such as Resolute Bay and Blossom Point don't even though they do have ionograms according to t…
-
Charts do not auto-update when a station is selected on the map.
![image](https://user-images.githubusercontent.com/11013061/103918127-6310ba80-50dc-11eb-8536-7606974cbd2b.png)
-
### Prerequisite
- [X] I have searched [the existing and past issues](https://github.com/open-mmlab/mmyolo/issues) but cannot get the expected help.
- [X] I have read the [FAQ documentation](https://…
-
Roll number may be expected to be matched with a single station, however, some rolls have a few ionogrammes being matched to another station.
Error rate seems to increase with increasing ionogramme…