-
Some LEDs of the group of 7 at the top of the module do not light up at all.
I have verified that the LEDs work, and I have tried with three different TLC5940NT ICs. With each IC, the LEDs that do …
-
### Describe the bug
Installing ER605v2 with SNAPSHOT brings the device up with an invalid LED config.
Kernel_log
```
[ 6.088339] leds-gpio leds: Led green:status renamed to green:status_1 du…
-
### Description
please add a parameter to change the size of the LEDs.
For my taste the LEDs are a bit too big.
### Have you provided an initial effort estimate for this issue?
I am no FlowFuse te…
-
Uncovered while doin ghte ChromaTek button. Try creating a set of LEDs with any number of LEDs. the sample of 10 is fine. Then try setting the color of just 1 of the LEDs. I definitely fails on LE…
-
Would love to be able to configure a generic/reusable effect that can be applied to different leds using parameters or similar. Reading through the docs I don't think this is possible currently?
Fo…
-
The anodized black tunnel between bottom pcb (uv leds) and mainboard and the metallic-silver light funnel inside it scratch the bottom and main pcb. The protective layer of varnish above the copper pa…
-
Using the LED spec in slack (will update here) write commands to set LED colors
-
### Describe the bug
I can not configure the LED behavior of the AX835 router. I can set them up using LUCI but no LED is turning on when expected.
![Screenshot 2024-08-30 232857](https://github…
-
Hi There,
i am attempting to build the prebeskar - mandoputer. with the itsybitsy rp2040 and the 1.14" screen
i have followed the guide, but i appear to have run into an issue where all i get is…
-
### What happened?
WLed crashes when setting some effects like Fireworks 1D
### To Reproduce Bug
1. Set the Length of leds to 3
2. Set the effect to Fireworks 1D
### Expected Behavior
To work fi…