-
It looks like when the mavin na128 loadcell is compressed in the long axis, it will produce a reading.
When the plate is attached to the loadcells and the M6 bolts are tightened, the reading changes.…
-
We will need also Load Cells (FSR) sensors simulation since they will be mounted down the feet.
In NAO these sensors are implemented as bumper sensors using the `libgazebo_ros_bumper.so` (check [http…
-
Hi Github Members, please teach me how to use HX711 with this loadCel (http://www.sah.rs/Senzori/CZL601_eng.html)l. I have connected this loadcell with 9v adapter and arduino (mega) has crash. Please…
-
Configures the loadcell over wifi.
The commands are avaialbe here: https://github.com/knoterich/force-logger/wiki/Load-Cell-Protocol
-
Hi,
Maybe I'm just too stupid, but I cannot even manage to add a second sensor.
I used the example and successfully connected a full-bridge loadcell to AIN0-AIN1.
Than I wanted to add a second fu…
-
I would love to be able to trigger events in Home Assistant when a pour starts vs waiting for the scale to become stable.
I love the fact it doesn't consistently send scale readings while it stabiliz…
-
There may be an issue with how the load cell is reading movement. To summarize, when lightly tapping upwards on the mouse chair, large spikes are visible in the raw data (indicated as "up" in plot), h…
-
Hi every one
When i connect two loadcells via junction box to hx711 A input i got some values that changes not in linear form.it means that when the load is more than a special value , hx711 sends low…
-
Went ahead and used all of this that you made available (btw tks alot, really nice you made all of this available to everyone), but im having an issue.
I have my G27 pedals with a loadcell on the bra…
-
I am using a loadcell attached via HX711 Loadcell amp to Arduino Pro Micro for a sim racing brake.
It calibrates fine in Arduino with values over 30,000 with many kgs of pressure on the loadcell. In …