-
board: ESP32 Wrover Module
ESP32 2.0.9
Arduino IDE 2.1.0
Ran and compiled both examples without change.
Got below errors for ltr_329als_simple, and about half these errors for compile_test:
…
-
The library worked fine on Arduino 1.0.6, but after upgrading to v2.0.0 the device reboots on the next loop cycle after calling `Arduino_LoRaWAN::SendBuffer()`. I have a `Lora` wrapper class which sim…
-
It will be great if it can run on ESP32 and MicroPython.
-
I am trying to use the MCCI boards but cannot find a board similar enough among the ones available. Specifically, in the current platformio library there are no STM32L0 boards with Arduino framework s…
-
The MKRWAN library has some flaws regarding the timing and handling of the downlink message. Unfortunatly there is a lot of work to do to improve the library so here are some options:
Use a better …
-
Hello,
i am unable to compile version 3.6.2 for heltec esp32-s3 v3.1 hardware. I try all 3 possible options in platfomio.ini
halfile = ttgotdongles3.h
;halfile = ttgotdongledisplays3.h
;halfi…
-
Hello :)
Iam martin from germany and i try to connect my ttgo v21 boards with the the things network. Unfortunately I get a lot of errors in platform io so I don't know how to start. :(
**Here a…
-
Hello,
I'm trying to compile the ttn-otaa example with my ESP32 but I have this...
c:\Users\...\Arduino\libraries\MCCI_LoRaWAN_LMIC_library\src\hal\getpinmap_thisboard.cpp: In function 'const Arduin…
-
When attached to the serial monitor, the logs are flooded with a print buffer deprecation error, here is an example of the logs from boot (DevEUI, AppEUI, AppKey & location redacted):
```
rst:0x1 (P…
-
Hi.
I connect to heltec wifi lora 32 v2 use this project's example code.
I use example on Examples/MICC LoRaWAN LMIC library/ttn-otaa and I wrote pinmap like this
``` c
// Pin mapping
const…