-
The documentation and examples are in the wrong place, for some reason. They're partially at https://github.com/mcci-catena/Catena-Sketches, partially at https://github.com/mcci-catena/Catena-Sketches…
-
The MKRWAN library has some flaws regarding the timing and handling of the downlink message. Unfortunatly there is a lot of work to do to improve the library so here are some options:
Use a better …
-
Thanks for sharing your library. However, I get error on compiling it for Arduino pro mini (328P-3,3V) with following errors:
> In file included from C:\Users\XXX\AppData\Local\Temp\arduino_modifie…
-
I am trying to use the MCCI boards but cannot find a board similar enough among the ones available. Specifically, in the current platformio library there are no STM32L0 boards with Arduino framework s…
-
There are 23 header columns but only 22 data columns. There are headers for “Vbat”, “Vsystem”, and “Vbus” but I think “Vsystem” is not being written? Can this value be written or the header column f…
-
Hello everyone,
Anyone have an error like the one below
`LMIC-node
Device-id: nodemcu-32s
LMIC library: MCCI
Activation: OTAA
Interval: 60 seconds
FAILURE
.pio/libdeps/nodemcu…
0d3ng updated
9 months ago
-
It would be great to start fresh when you feel like you're getting stuck and have attempted to re-provision platform or LoRaWAN.
When you are connected to the Catena via serial monitor type in som…
-
If we know that the time is synchronized on the device (using the get-time mechanism) then Node-RED can use the time stamp from the message rather than the network time. But if we don't know that the…
-
1) I'm using a 4460, but need to add an I2C device at addr: 0x50 where the Fram is located...
I see the FRAM8K driver and it has its address defined in the Mb85rc64ta.h file, so I can change it there…
-
Hello everyone, excuse my English, I would like to know if there is or someone has developed a sketch where the shipment is made when an event happens, I want to make a project where data is sent ev…