-
The implementation of IRQ generation in the AudioDMA would make it easier to implement double-buffering type scenarios. This will allow the use of digital audio in a wider variety of applications sin…
-
on my workstation with own toplevel I see warning that CSN is not registered in IOB (the other signals are).
I am using not this code from here, but the code from MEGA65 fork...
p_fsm : proc…
-
We'd love to help get Neohabitat running on the MEGA65.
Main differences of relevance are the internal 3.5" drive that can read 1581 disks, and the use of the on-board 100mbit ethernet interface,…
-
When the Pi1541 is connected to a MEGA65, it works to `LOAD"$",11` on the list of disk images, but once a disk image is loaded and the true 1541 emulation kicks in, then `LOAD"$",11` will hang on `SEA…
-
Platform MEGA65, ROM 920377 and newer:
When I use my SD2IEC device on my MEGA65's IEC port in Mega65 mode, it works unreliably.
At first glance it works. But loading is very slow and when I load l…
-
### Symptom (1)
Final Cartridge III hardware cartridge starts into BASIC instead of starting into the FCIII main menu.
Tested with HDMI: Flicker-free ON and OFF. Behavior of the FCIII does not c…
-
It would be nice to have support for the C65 Mode of the MEGA65. You also ported the software to the Commander X16, so this would only be natural, and would open many applications for C65 use.
-
It'd be good if we got either emails or discord bot chat notifications from travis whenever our manual builds go from green-to-red (and perhaps from red-to-green too).
I haven't got time to dig int…
-
Further to [this issue](https://github.com/amb5l/tyto_project/issues/6) with the old repo, let's add the MEGA65 as a supported platform for the **hdmi_tpg** design (and bring in the `oserdese2` relate…
-
Running M65Connect 5-JUL-23 Windows Build the SD Card Manager always lists as Internal with no way to pick internal or external (only internal is available).
It appears that when an external card is …