-
In the Readme.md file, the only supported Arduino desk is Arduino MKR WAN 1300.
Is this library compatible with the new Arduino MKR WAN 13**10**?
If so, it would be beneficial to add that into t…
-
using together the two libraries with an arduino MKR WAN 1310 it happens that `GPS.available ()` returns Always 0, how can this be solved?
-
Hello,
first, @facchinm thanks for the awesome library!
I found in your example (listed bellow) that the library is intended for MKR WAN 1300 board. Will the library offer support for the new …
-
Hey,
Im not sure about the SJA1000 but the MCP2515 supports multiple filters, however the api of this library does not support multiple filters.
Maybe a macro constant like `MAX_FILTERS` and a fun…
-
I was testing LoraSendAndReceive sketch with MKR 1300 WAN as node and a PyCom LoPy as "nano gateway" with The Things Network.
Pycom "nanogateway" / TTN can occur in "join accept" downlink timing prob…
-
After installing all required packages for the board an examples (as well as the MKRWAN library), the sketch "LoRaDumpRegisters" returns false in the LoRa.begin(...).
There seems to be a different …
-
Related to #73.
-
Has someone been able to configure the mkr wan 1300 using the MKRWAN library on the us915 band? I'm not able to see any packet going through the gateway (This is configured with the 915E6 band as well…
-
I have noticed an anomaly with the MKRWAN library that prevents the application from receiving a downlink payload.
When sending a downlink to a MKR WAN device, I can see the downlink queued by the …
-
I have a setup consisting of a Dragino LoRa HAT on a Raspberry PI 3b+, and two Arudino MKR WAN 1300 devices. After installing and running the dual_chan_pkt_fwd software, the gateway was successfully r…