-
Hello there! I just purchased the ep1 but I think that the mm wave is not working! I have made an automation where a smart light turns on when occupancy is detected, so every once and a while the ligh…
-
Currently after 1-3 Days my mmWave data seems to be stopping.
There is no update of the positions and occupancy anymore. The Light sensor seems to still properly update.
What I tried:
* Restart m…
-
### The problem
Since I've upgraded to 2024.1.0 my ZigBee devices (lights, switches, fans etc) are having a few seconds/minutes delay in responding to commands. I have tried to restore to previous …
-
The example in the Wiki connects only via Bluetooth. With the following attachment, we can add the functionality of the sensor connected to a Seeed Xiao ESP32_S3 Sense with camera.
```
# Configura…
-
### Problem description
Wall mount 5v version of this product: https://nl.aliexpress.com/item/1005005477612297.html?spm=a2g0o.order_list.order_list_main.16.2a5879d214SME3&gatewayAdapt=glo2nld
### S…
-
I updated a couple of sensors from Stable to Beta via USB and now frequently get HA Warnings that don't seem to impact the functionality of the EP1, but do cause the mmWave LED to toggle `on` and stay…
-
For 1 Micro RSC:
- [ ] cheap yellow display: esp32-2432S028 or custom PCB...
- [ ] speaker
- [ ] i2c mic
- [ ] battery
- [ ] battery bms
For 1 Mini RSC:
- [ ] Pi Zero 2W
- [ ] respeaker 2 mics hat
…
-
Hi there.
Its not clear to me how I need to configure the web gui of the ESPresence to support the DF Robot mmwave sensor? Can someone please provide some feedback? I have created the following sch…
-
作者好,之前在使用CaptureAll程序一切正常,后续由于系统崩溃更换到win10系统,我重新部署了Ti mmwave工作环境,并在mmwave studio上验证正常,重新配置好作者程序所需环境后,我运行出现了time out问题,暂时没有想到好的解决办法,怀疑可能是DCA板子数据链接出现了问题?
下边有三幅运行结果图,前两幅是time out出现问题,第三图是运行最终报错结果
…
-
### Prerequisites:
- Before requesting a device addition, please ensure there is not already a request for the device among the open issues.
- Make sure your Homey is upgraded to firmware v5 or hi…