-
Some Dynamixel motors spawned in our closet. This package has control boards that we can utilize. Begin working with these controls and interface with raspberry pi.
-
### Description
Changing the motor direction from the user interface would be simplest, yet powerfull feature. To be precise: I've switched to dual drive extruder, so I have to change the E m…
-
### Issue Description for STM32 Motor Controller Workbench
**Understanding STM32 Motor Controller Workbench for Custom Hardware**
This issue focuses on leveraging the STM32 Motor Controller Work…
-
Yeelight intelligent open close motor is a curtain control motor that can be integrated into Xiaomi Gateway 3, but it cannot perform related control operations well in the integration. I hope to incre…
-
it would be great if the motor control could also change direction when the image is flipped horizontally or vertically
Lu-Fi updated
2 weeks ago
-
Now that the motor control is implemented in Bonsai, we should add the option to implement the motion control algorithm via direct communication from H1 --> H2.
This basic algorithm is as follows:…
-
## Issue Description
There is a discrepancy in the instructions for adjusting the current using the potentiometer between the following documents for the Infineon Stepper Motor Control Shield with …
-
I have created a custom Object Dictionary (OD) entry 0x2000 0 named InputVelocity on the master PC for motor control. My goal is to change this InputVelocity's value from the PC and control the motor …
-
When running the best_default_program in tank mode, we've found that tank mode works with the right motor being controlled with the right stick like intended, but the left motor is being controlled by…
-
motor faders barely work at half the voltage/speed they are designed for.
if run with higher than 5v (should be 10 and testing at 12) they have a difficult time reaching the correct location and just…