-
Hi. I would like to implement your code for STM32F429. Can you provide a list of things which i need to change in the code? And could this list be generalized so that your code can be adapted to other…
-
Hi, I am attempting to use the stm32h743zi2 and I am getting errors with the interrupts define and the do not use interrupts define in the code below I am trying to add the pins PF1 and PF0 to the cod…
-
On recent Nucleo-144 boards, the STLINK programmer is not detachable anymore and thus overlaps with EEM0.
With standard-height pin-headers, the port is not usable anymore:
![image](https://githu…
-
Hello everyone,
I'm currently working on taking a picture with the nucleo 144 STM32 H743ZI board and an OV5642 5MP camera module by using the arduino IDE.
I have downloaded the required software in …
-
There's an ongoing work which goal is to add support for (all) [ST Nucleo boards](http://www.st.com/en/evaluation-tools/stm32-mcu-nucleo.html) to RIOT.
The goal of this issue is to keep track of th…
-
Use the [STM32 Nucleo 144 Manual](https://github.com/madison-embedded/documentation/blob/master/stm32/nucleo/nuc144.pdf) to finish populating `GPIO_TABLE` in [`include/gpio_alias.h`](https://github.co…
-
Need to write code that exposes the SDMMC peripheral so we can later pull in file system code (i.e. FAT32) and log information to an SD card.
-
I am trying to log the data from STM32F429 board to Qwiic logger through I2C port. Below is settings for I2C in STM32F429
Address Mode: 10Bit
Clock Speed: 400K
Following commands are sent from ST…
-
Hereafter the list of all new variants requested
## Note
**This is a community projects so any help are welcome.**
To add a STM32 based board follows this [wiki](https://github.com/stm32duino/A…
-
The various general-purpose timers in the silicon can be used for dozens of purposes.
Create an interface that easily exposes the ability to drive a PWM signal or measure pulses via the input captu…