-
I suspect there is some sort of a conflict with the OneWire library. When I comment out my `gpio_viewer.begin();` line (i.e. everything is loaded and set up, but I don't start the viewer) I get the no…
-
Based on https://github.com/cogsy23/aowslave
Modified to work on ch32v003fun.
https://github.com/VooDooSi/CH32V003_owSlave
-
Hello!
I'm using the onewire CI DS28E05 (https://datasheets.maximintegrated.com/en/ds/DS28E05.pdf) but Micropython `ow.scan()` show nothing. That is a `onewire` chip, so it use/works with the `on…
-
### Description
I am currently working with ESP32-S2FN4R2 on a LOLIN S2 PICO board.
I am using OneWire library to connect DS18B20 (with Rob Tillaart DS18B20 library)... not very original !
…
-
/*
This example connects to an unencrypted WiFi network.
Then it prints the MAC address of the WiFi module,
the IP address obtained, and other network details.
created 13 July 2010
by…
-
I have a couple of onewire iButton keys (DS2401). They are used to set an operational mode for OH (e.g. vacation mode)
They are configured as onewire basic things
e.g.
```
Bridge onewire:owserver…
-
someone connect a sensor OneWire
-
This issue is still a timing logic problem.
My code is as follows:
```
#include
#include
#define ONE_WIRE_BUS 2
OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature sensors(&oneWire);
vo…
-
Hi All,
For a recurring project, I am using several strings of DS18B20 temperature sensors, and I would like to have each string on a separate onewire bus and storing them in a common array that I …
-
Can you add onewire protocol to you firmware?