PaulStoffregen OneWire issues

PaulStoffregen / OneWire

Library for Dallas/Maxim 1-Wire Chips

http://www.pjrc.com/teensy/td_libs_OneWire.html

606 stars 391 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Arduino pin remapping is not considered

#148 SinusJayCee opened 1 week ago
0
Add "#define CRIT_TIMING IRAM_ATTR" for ESP8266

#147 thjean opened 1 month ago
1
Update OneWire_direct_gpio.h Comment out >= 33 pin check

#146 jflasch2 closed 2 months ago
1
Add ESP32-C6 to conditionals

#145 tyeth opened 3 months ago
2
Update OneWire.cpp to correct the ESP32 code

#144 Rob58329 closed 5 months ago
0
Improvement STM32 OpenDrain output, timing issues

#143 tshcherban opened 5 months ago
0
DS1820 temperature readings ESP32 in combination with FreeRTOS tasks leads to malfunction of the RMT Module

#142 sirpete83 opened 6 months ago
3
Support for Pin 48 on ESP32-S3 in OneWire Library

#141 KaoruTK opened 6 months ago
5
Add support for Silicon Labs hardware

#140 silabs-bozont opened 6 months ago
0
Changes to support RW1990 timing.

#139 owenduffy opened 6 months ago
0
unexpected warning while compiling for ESP32 S3

#138 Pepito-design opened 7 months ago
0
ATmega328pb does not wake up on pin change after reading a point

#137 zaplakkies opened 7 months ago
1
ESP32 version 3.0.0 compiling error

#136 Pr77Pr77 closed 6 months ago
9
Fix #133 - annoying compilation warning

#135 mathieucarbou opened 8 months ago
0
Fix build error on arduino-esp32 v3.0.0-alphaX

#134 meikjaeckle closed 9 months ago
0
Bug in release 2.3.8: extra tokens at end of #undef directive

#133 pixelfriese opened 11 months ago
4
Arduino IDE 2.1 with ESP32 board 3.0.0-alpha2 : OneWire not compatible

#132 sbarabe closed 9 months ago
5
Cannot use ESP32 S3 GPIO 43, 44 for OneWire Dallas DS18B20 due to setting in util file

#131 teastainGit opened 1 year ago
6
BUG in release v2.3.7: [Warning] unused variable `reg` ==> Changes of v2.3.7 are not inside zip-file

#130 hasenradball opened 1 year ago
10
Intermittent CRC errors on Arduino UNO R4 WiFi and R4 Minima

#129 MrYsLab opened 1 year ago
0
It is desirable to support new AVR controllers.

#128 mikrocoder closed 1 year ago
3
mbed: fix crash on digital* operations

#127 facchinm closed 11 months ago
4
Why has the new AVR controller support been deleted?

#126 mikrocoder closed 1 year ago
9
added CMakeLists.txt for use under ESP-IDF

#125 diplfranzhoepfinger opened 1 year ago
0
Compatibility issue with AVR DxCore Family

#124 sandeepkumar0153 opened 1 year ago
4
rp2040 earlephilhower library compatibility

#123 joyfab opened 1 year ago
9
OneWire malfunction on ESP32-S2 ?

#122 hervmele opened 2 years ago
22
Compatibility issue with STM32 F030CCTx

#121 kramzarales opened 2 years ago
0
Fix warnings for architectures where baseReg is not used

#120 FrankBoesing closed 2 years ago
0
Fixed compilation for ESP32 and ESP8266 with -Werror=unused-variable

#118 matthias-bs closed 1 year ago
6
Compatibility issues with OneWire and Nano Every?

#117 Bee135 opened 2 years ago
1
volatile IO_REG_TYPE *reg IO_REG_BASE_ATTR = baseReg

#116 Serega88kos closed 2 years ago
2
Add basic RP2040 support

#115 nmaas87 closed 2 years ago
0
Esp32 arduino core 2.0.3 support

#114 Jason2866 closed 2 years ago
0
Resolved: Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.

#113 jvonehr opened 2 years ago
1
ESP32 compile error with arduino-esp32 v2.0.3-rc1 (error: 'esp32_gpioMux' was not declared in this scope)

#112 bghavami closed 2 years ago
36
esp32c3 compile error when using OneWire

#111 ZJDATY closed 2 years ago
6
add onlyPoolUp mode

#110 AntonioPrevitali opened 2 years ago
1
scratchpad is 9 bytes

#109 karlomblus closed 2 years ago
0
Arduino-ESP32 developers changed API (GPIO now using ESP-IDF API on all chips.)

#108 dukess opened 2 years ago
15
Add inter-bit delay

#107 dmitrodem opened 2 years ago
0
Fix issue with getDeviceCount() on ESP32

#106 mp-se closed 5 months ago
4
Arduino Nano RP 2040 error

#105 Michal-Visuality opened 2 years ago
2
Add ONEWIRE_MULTICORE flag to run in multi-core env

#104 heeres opened 3 years ago
1
Getting Guru Meditation Error when using DallasTemperature && OneWire with Wifi.h on esp32

#103 Soumi422 closed 3 years ago
5
Fix 'rtc_gpio_desc was not declared' compile error with arduino-esp32 v2.0.0

#102 codepam closed 3 years ago
16
getDeviceCount of "Meilenburton/Arduino-Temperature-Control-Library" dose not work on ESP32

#101 DerDoubleD opened 3 years ago
2
ESP32 compile error with arduino-esp32 v2.0.0-rc1 (error: 'rtc_gpio_desc' was not declared in this scope)

#100 avillacis closed 3 years ago
29
Add line for Atmega4808

#99 andonoc opened 3 years ago
1
Add support for new ATTiny MCUs

#98 MiBiMiFlo closed 3 years ago
1