-
Is it possible to continously(!) capture all measurement data from owon oscilloscopes?
Such as an audio signal is catpured with the scope through it's A/D converter and the data in turn is send via U…
-
Hi I know this has not been updated in a long time but I've only just found this and came across it has I'm new to the EPS32 world.
The issue I'm having is as follows,
It all complies and uploads ok…
-
J'utilise ZiPluses sur un compteur Gazpar avec une pile cr2450 et la durée de vie de la pile n'excède pas le mois.
Est-ce que d'autres personnes ont le même souci ?
-
### Link
https://www.aliexpress.com/item/1005005575336871.html?spm=a2g0o.order_list.order_list_main.11.28e31802Wxn6Wl
### Database entry
{"id":115,"type":"EndDevice","ieeeAddr":"0xe0798dfffeb87446"…
-
Bonjour.
Je viens d'acuérir une sonde dde température OWON THS-317-ET :
https://www.domadoo.fr/fr/peripheriques/5998-owon-capteur-de-temperature-connecte-exterieur-sur-cable-zigbee.html
Quand j'a…
-
### What happened?
HA via z2m on Sonoff ZBDongle-P; Tuya _TZE200_nslr42tt pairs OK and all values are reported; however power readings are well off the adequate line. Especially power readings go cra…
-
## Information about the device + link
The device is a derivative of already supported device OWON THS317 https://www.zigbee2mqtt.io/devices/THS317.html
Bought from here : https://www.domadoo.fr/f…
-
### What happened?
I get lots of error logs lines=
```
Received network/route error ROUTE_ERROR_ADDRESS_CONFLICT for "0".
```
And many devices are unusable. Pass to timeout state and back.
…
-
Hello,
The topic `yasolr/grid/power` is nice but is it possible to have a `yasolr/grid/energy` to publish the energy measure from JSY to Home Assistant Energy dashboard ?
My understanding is tha…
-
### What happened?
I have 2 PIR313-E since yesterday.
Both PIR313-E went registered without any problem in Z2M.
But once it's done, nothing more: PIR313s don't emit anything else despite the blin…