-
The PEAK PCAN-USB FD adapter is connected to custom electronics with no other nodes on the bus.
Sometimes the firmware resets especially during testing. If a message is sent to this single node while…
-
I configured CAN using the interface.Bus method and selected "receive_own_messages=True". But this doesn't seem to have any effect. I'm not receiving the sent messages back.
I checked the PCANBasic…
-
Hi,
We've successfully used TSMaster with our Peak System PCAN-USB devices.
However, we can't seem to see PCAN-Ethernet Gateway device in the channel selection menu.
Note that we successfully see i…
-
Does this project support LIN interfaces on hardware like PEAK's PCAN-USB Pro FD (https://www.peak-system.com/PCAN-USB-Pro-FD.366.0.html?&L=1)?
-
Hi,
nice idea!
How can I use it with peak PCAN USB on Windows? I don't find eine any code for this (no Adapter etc.)
Br, Nische
-
### Describe the bug
To put it simply, I have a script that implements a simple protocol to flash a device via canbus. I'm using the python-can library, and have access to a PCAN peak and a VN1630 fr…
-
How can I disable the TERM (120 ohms)?
I do not found anyway to do in Pcan-View, Busmaster or SavvyCAN.
-
Hi there
I want to connect a bosch radarsensor to my computer and using this ros2 library to read data from the sensor. What is the easiest way to connect via the 8-pin plug on the sensor?
thanks in…
-
I am trying to set up the BH282 hand to work with ROS and I am having some issues. I am running linux 16.04. Which pcan driver do I need to install (7.X, 8.X)? Also what flags need to be set during bu…
nag92 updated
6 years ago
-
As the title says, hope PCAN-USB Pro FD can be supported