-
Hi Simon,
I'm trying to control an MCP4441 chip using a Raspberry Pi, and I'm having some issues. I've been using your [repository/library] as a reference, but I'm not getting the expected results.
…
-
To safely shutdown a headless Pi running Auto_RX, one has to establish for example a SSH connection to the Pi and then shut it down.
It would be handy to have a "Shutdown Pi" option in the control pa…
-
So far, I've been using a Raspberry Pi, or Pi Pico W for the GPIO control - and assuming Wifi access from the device for "remote control" from the GUI.
As the need for ocnfiguring the wifi of Pi Pi…
-
# Controlling an MG995 servo with a Pi
Explore how to connect a Raspberry Pi with an MG995 servo motor.
[http://www.theappliedarchitect.com/controlling-mg995-using-a/](http://www.theappliedarchitect…
-
- LED strips for signs/lamps at the workshop should be controlled based on a motion sensor
- LED strip in Prusa Enclosure should be controlled based on printing status. Maybe listen for events using …
-
**As an** engineer
**I want** to set up Raspberry Pis to use as the control plane nodes for my cluster
**so that** I can decentralize my control plane
**and** increase the portability of my cluster…
-
chat w/gpt: tried to think of how to integrate existing codebases with the rsc (complicated but perhaps a good idea?) alternative is we run our own codebase and only rely on external frameworks for no…
-
### Describe the bug
The default installation of alsa & bluetooth is very different on my 3A+ than it is on my Zero 2W, despite the fact that the same OS was installed on both: 'bookworm', Raspberry …
-
Hi,
I recently built a Raspberry Pi with Bookworm and installed an IR transmitter to control our lounge fire via Alexa. It works great!!
I decided to implement a similar setup to control our el…
-
| by mrd599@nci.org.au
___
Setup proper PI control configuration
___
_Issue migrated from [trac:330](https://accessdev.nci.org.au/trac/330) at 2024-01-31 18:30:36 +1100_