-
https://www.youtube.com/watch?v=UnIa2jbEHRk
SparkFun Pro Micro RP2350
The RP3250 is a unique dual-core microcontroller with two ARM® Cortex® M33 processors and two Hazard3 RISC-V processors, all r…
-
Please I need help when I Upload in the Pro Micro Leonardo it gives me an error, why ?
```
Sketch uses 24540 bytes (85%) of program storage space. Maximum is 28672 bytes.
Global variables use 1638 …
-
Hi!
I flashed a svlinky 0.2 with a config from here https://github.com/arduxio/zmk-ardux.git editing its config/west.yml to:
```
manifest:
remotes:
- name: zmkfirmware
url-base: …
-
The Sparkfun Pro Micro (and presumably the other 32u4 boards) use a different COM port depending on if it's in bootloader mode.
I'm currently trying to just get a blink sketch working on a Pro Micro…
-
Hello author, I like TPS42 designed by you very much, and I am trying to make it. However, when choosing the master, I found that the generated firmware is much larger than the memory size of Atmega32…
-
Is it possible to connect HUSKYLENS and EV3 with arduino pro micro?
I would like to experiment with breadboards.
Where should I connect the wires to and from?
arduino pro micro : https://x.gd/xpb…
xhia1 updated
1 month ago
-
3 issues I found trying to get the pro micro usb-c holder to hold the controller.
1. Some of the pins are hidden and not exposed through the two opening lines (see image to the far right and you wi…
-
Hi, I have a brushless motor with an AS5600 magnetic encoder and an arduino pro micro, is it possible to work with your firmware using i2c?
-
Можно как то упростить и обойтись без Arduino Pro Mini,
использовать Arduino Nano или Pro Micro
evg26 updated
1 month ago
-
Hello,
As i can see, Atmega32U4 is usable.
Where can i find which pin i can use as audio output ?
Is pin 6 usable ?
Add a table of audio output pins by cpu would be fine .
Thanks for your hel…