-
Crashing when trying to start engine or something..
including crash report
Been flying on the plane, engines got off for some reason, i landed and tryed startup the engine, i figured out that i didn…
-
**Motivation: Why do you think this is important?**
Propeller today can [inject](https://github.com/flyteorg/flytepropeller/blob/5ce5085f6856890e555410fc59219f5f4c8b27ff/pkg/controller/nodes/task/k8s…
-
In propeller aircraft, if the engine is idle at low rpm, is considered engine stop.
This behaviour must be checked and tuning to 0 rpm = engine stop or similar.
-
1. Tested on Forge server. If cable block gets exploded with any kind of explosion, a big propeller model gets spawned at the location of each player. This model is clippable-through and isn't used an…
-
I've been looking to model small quadcopters along the lines of the [DJI Phantom](https://www.dji.com/phantom) plus hybrid models like the [Wingcopter](https://wingcopter.com/) and the [Alti](https://…
-
Using the either of the customizable engines it is possible to customize the number of blades, the blade length, and the max RPM.
None of these variables effect the thrust produced by the engine.
Thi…
-
After a fresh install of FAST-OAD-CS23 1.3.0 in a Python 3.10 environment, some modules are not registered. It is apparently due to a problem at Python level, which does not occur with Python 3.9.
…
-
Propeller tool (from propeller svn) is rather OP, allowing the smallest engines to generate massive thrust. Thrust is increased with inverse log of rpm, and no efficiency limit, and no drag.
Fin to…
-
**Feature description**
Instead of engines just have an on and off and going from 0 throttle to max throttle, there should be an ability to regulate how much thrust is being produced. When an engine …
-
Actually it isn´t possible to simulate icing of propellers in jsbsim. For that it it necessary to have a possibility to input/ modify the drag coefficient created by the ice on blades, so we get the t…
HHS81 updated
7 months ago