-
Hi, is it possible to change the state of one of the Raspberry Pi GPIO pins when prey is detected?
-
I wrote a program to detect changes in the GPIO on the Raspberry Pi and to call a callback when a change occurs.
If I set up more than two watches, node.js hangs.
The function poll_gpio(event) waits…
-
It appears that GPIO has changed with the Raspberry Pi 5. It would be great if you could update this module to support the RPI 5.
-
I use a ENC424J600 ethernet controller connected to a RPi Pico. The Pico also should generate the 25 MHz clock for the ENC424J600. In Zephyr v3.5.0 I used a PRE_KERNEL_1 SYS_INIT and the RPi Pico SDK…
-
## Motivation
Currently, the Python hardware controller is unable to run on the Raspberry Pi 5 - it depends on the `rpi-gpio` package, which does not work on the Raspberry Pi 5 (see https://adafrui…
-
I'm having trouble getting this library to work on a Raspberry Pi 5. My understanding is that GPIO support has a few breaking changes on the Pi 5; this may or may not be related to my issue.
I've i…
-
I am experiencing inconsistent read and write issues when using multiple RCC522-RFID modules. The setup includes eight RCC522-RFID modules, all connected with a common MOSI, MISO, and SCLK, but each h…
-
Hi,
I upgraded my raspberry pi 4 to bookworm and kernel 6.6 and even if the GPIO pin 17 is triggered the clean shutdown down does not respond or shutdown the raspberry pi anymore.
I also changed th…
-
Beta version of snap, following [Wiki](https://github.com/canonical/matter-pi-gpio-commander/wiki/Setup-and-control-a-lighting-device):
```
$ sudo snap install matter-pi-gpio-commander --beta
matte…
-
I try to connect the pi-fancontrol to the gpio.pin 14 as described in https://snapcraft.io/install/pi-fancontrol/opensuse
# snap connect pi-fancontrol:gpio pi:bcm-gpio-14
error: snap "pi" is…