-
using the ethernet red pitaya 125-14, it works fine for RX, however when i change the ppm field , i do not see the signal shift in freq.
it seems the ppm field has no effect on the red pitaya
redp…
-
### Description of the setup:
#### **Device**:
Red Pitaya Stemlab 125-14 V1.0
#### **SD card image:**
- red-pitaya-alpine-3.18-armv7-20240204
- red-pitaya-alpine-3.18-armv7-20231004
-…
-
https://github.com/Koheron/koheron-sdk/blame/8f127be338727c9c97307b9f4a4175e2da72f78a/examples/red-pitaya/fft/drivers/fft.hpp#L267
This lock_guard is never being unlocked. The destructor is only ca…
-
C:\Projects\RedPitaya\FPGA>make project PRJ=v0.94 MODEL=Z10
vivado -source red_pitaya_vivado_project_Z10.tcl -tclargs v0.94 ""
process_begin: CreateProcess(NULL, vivado -source red_pitaya_vivado_pro…
-
I'm unable to set TX power to more than 1W. Tried setting Tired Tune Percent to 100, also normal TX using FM mode, Set PA calibration to 100, still no more than 1W out.
-
## Issue ##
The signal generated by Linien on the output port 1 of the Red Pitaya is significantly noisier than the one generated by the built-in Red Pitaya oscilloscope.
## Description ##
I am …
-
I am trying to change the frequency in the iq module via a Trigger. Unfortunately doing so via the python API seems to be too slow. Hence, I need to change the FPGA code in order to achive a fast enou…
-
### Description of the setup:
* Device: Red Pitaya 125-14
* SD card image: red-pitaya-alpine-3.6-armhf-20180523
* Application: sdr-receiver-hpsdr
* Other relevant information:
### Descrip…
w2naf updated
6 years ago
-
![pyrpl1](https://user-images.githubusercontent.com/107584545/173924430-6578213e-75cf-4946-a398-06388ebf7708.png)
I followed the quick start steps on the red pitaya website, and after I write the i…
-
Hi,
We are trying to use RP-125 for a low field NMR spectroscopy. It seems your sofware is perfect for us. So we need bit help. Can we use it for that board? How to install this software and…