-
Hello,
I started working with RedPitaya recently because I have an application where I need to acquire large amounts of data (>2 MSamples) at high sampling rates (>100 MSamples/s). The direct memor…
-
Hi, using it on Mac Catalina. Works fine with RTLSDR.
Just tried to add support for my RedPitaya adding the module SopayRedPitaya.
I compiled it with macports and added to the folder "modules0.8" …
-
using the ethernet red pitaya 125-14, it works fine for RX, however when i change the ppm field , i do not see the signal shift in freq.
it seems the ppm field has no effect on the red pitaya
redp…
-
Hi:
I am experimenting with Labview on Redpitaya using the examples downloaded from national instruments site, I tried blink and works fine blinking led's, means the connectivity is working fine, b…
-
### Description of the setup:
#### **Device**:
Red Pitaya Stemlab 125-14 V1.0
#### **SD card image:**
- red-pitaya-alpine-3.18-armv7-20240204
- red-pitaya-alpine-3.18-armv7-20231004
-…
-
Link referencing to docs looks dead:
https://github.com/RedPitaya/RedPitaya/blob/master/apps-free/impedance_analyzer/info/info.json
These ones:
http://goo.gl/2lnbeN
https://wiki.redpitaya.com/i…
-
C:\Projects\RedPitaya\FPGA>make project PRJ=v0.94 MODEL=Z10
vivado -source red_pitaya_vivado_project_Z10.tcl -tclargs v0.94 ""
process_begin: CreateProcess(NULL, vivado -source red_pitaya_vivado_pro…
-
Discussion started here: #350
-
I was running this code
`
from pyrpl import RedPitaya
class RedPitayaController():
def __init__(self, hostname: str, user: str = 'root', password: str = 'root', config: str = 'fermi',
…
-
I need to adquire one sample or a fixed number of samples (say 10-100) after each trigger event and save to buffer.
For example, I have a trigger running at 1 KHz connected to channel 2. I start ac…