-
Hi,
Whatever I do, I cannot find the RFLink-ESP Settings tab, so I cannot configure the MQTT settings.
I'm using version 2.6.3 of the Arduino core, and everything else (Wifi, RFlink discovery) w…
-
Problem with Rflink32 on an ESP-WROOM-32 with sw: 'RFLink_ESP_5.1-20231128-093932-master'
Sending the command : 10;Newkaku;0010ab0e;b;ON;
on the USB-serial interface or in MQTT in toppic /ESP00/cm…
-
Hi,
Great idea to port RFlink from Mega to ESP and inluce MQTT, very much appreciated!
Does your code support CC2500 ([RFlink](https://www.rflink.nl/wires.php)) module?
And if it does, how to w…
-
ESP looses connection to rflink if bad data is received.
-
**Is your feature request related to a problem? Please describe.**
I recently buy DIO RF plugs, these are not supported by espruna due to a new RF 433 protocol : KAKU.
**Describe the solution you…
-
Hello,
I'm experimenting with your gateway (great piece of software!) but having my PI with Openhab in my electrical closet in the basement, I needed my rflink on an other location. Since 5m of USB e…
-
Hello, thanks for your work on this library!
We have 3-button Sonoff T2EU3C-RF and it's working only partly:
- left button not detected
- center and right button detected as:
20;CE;Eurodomest;ID…
-
Hi,
New to all this - I have an Arduino based RFLink connected to a NodeMCU and feeding serial messages to ESP-Link. In the web based console I can see the serial messages so I know my config is g…
-
Hi ! first of all, thanks for all the amazing work you did !
I need some help please.
Receiving data works like a charm but I have issues with emission :
my ESP32 nodeMCU always crash when I t…
-
Hi Stef,
Great work, i would love to ditch the ATMEGA 2560 and run this on a Wemos D1 mini.
Is this possible, and how to connect the RFLink board: https://www.nodo-shop.nl/nl/41-rflink-433-mhz t…