-
Hi,
I use the T-ETH-Lite-ESP32S3. Later I would like to equip it with the PoE Shiled.
I use VSCode and I adapted the platformio.ini as describet [here](https://github.com/Xinyuan-LilyGO/LilyGO-T-…
-
Hi there.
I am trying to control 3x CA RGB leds but it appears to be impossible.
```
#define R1_PIN 12
#define G1_PIN 14
#define B1_PIN 27
#define R2_PIN 26
#define G2_PIN 25
#define B2…
-
Suggestion:
We add a `cycle` method to `RGBLED` which cycles through the colours. Parameters similar to `blink` (maybe `cycle_time`, `n`, `background`, `start_color`)
-
-
Pin 11 maps to blue color in the LED and Pin 13 maps to red color. While is specifies differently on the PCB: 11(R), 12(G), 13(B). Pin 12 maps correctly to green though ;-)
-
### Describe the Bug
The make sofle:rgb_default fails:
```
$ make sofle:rgb_default
QMK Firmware 0.24.9
Making sofle/rev1 with keymap rgb_default
Generating: .build/obj_sofle_rev1_rgb_defaul…
-
#include
#include
#include
#include
MeDCMotor motor_9(9);
MeDCMotor motor_10(10);
void move(int direction, int speed)
{
int leftSpeed = 0;
int rightSpeed = 0;
i…
-
**Describe the bug**
Hi, I have recognised that RGB UI LED doesn't light up automatically after startup. This behaviour was observed on about week old master branch (https://github.com/ThunderFly-aer…
-
Test attached projects to make sure they still work with micro bit V2.
[MicrobitIOpin_button.aia.zip](https://github.com/mit-cml/appinventor-extensions/files/6862715/MicrobitIOpin_button.aia.zip)
…
-
Trying out the ```pycom.rgbled``` over the interactive terminal I get a rather long freeze of the pymakr interface. The code is not smart, and goes as follows :
```
import pycom
for i in range(0…