-
### The problem
First one, thnks for this great project that make EnOcean usable ;-)
I've an issue with this Nodon module who has Enocean protocol D2-01-0F ([https://nodon.fr/support/module-multifo…
-
Hi, I would like to build your proposed sauna control. Can you share any schematics and / or pictures?
Thanks in advance.
ZE135 updated
3 years ago
-
In your notes you mention it won't work with a timer based sauna. Mine has a timer, but it also has a separate thermostat control.
The thermostat can be left at a setting, but the sauna won't heat…
-
Über den Adapter wird folgender Wert abgerufen:
steamerError:0
Wie bemerkt die Steuerung einen Fehler im Verdampfer?
-
I would like to contribute for those who cares in 4 steps.
**T Sensor**
For an experimental purpose, a used a DHT22 than switched for a 18ds20. Kept in code for the better comprehension.
**T Re…
-
I was thinking if there would be any chance to set up platform for Stateful Programmable Switch, combining one GPIO pin to drive relay, and another GPIO pin to read status?
This is Homebridge lib f…
-
Hi!
First off thank you for your work!
So my Lydos has this mode called ECO which automatically controls temperature based on my consumption. It works like magic and almost always had more hot w…
reyo updated
7 months ago
-
I use the `heaterCooler` accessory with `"minTemperature": 18, "maxTemperature": 25` because I never need to set values outside that range and it makes the HomeKit controls more useable.
Unfortunat…
-
Code was written using JSON Arduino library 5 and not 6. If you use this code, please use library 5 to compile.
When I have time, I will upgrade the code to 6 and re-test.
-
`cook`. Ugh. Just ugh. This project needs a better name - puns encouraged and welcome!
If I choose your suggestion according to the completely arbitrary criteria of "I like it the best", I will assem…