-
By now, we were able to narrow down the explanation of what causes DSW formation to decrease, when using thicker top cells.
Essentially, thicker top cells shift the Ekman transport near the Antarc…
-
## Component list
- Motor.
- LM35 Temperature Sensor.
- HY-SRF05 Ultrasonic Sensor.
- 3 buttons.
- Red LED.
- USB to RS232 converter.
- Resistor 1K Ohm.
## Schematic
![PepsiCity_Scheme]…
-
## Milestone Description:
- **Objective**: Provide all relevant details about the hardware configuration and connections.
- **Deliverables**:
- A brief overview of the hardware used (microco…
-
I think the transistor is wired correctly in the Nano schematic and incorrectly on the other one.
I believe it should be an N-type transistor, wired to the middle pin with the 6.8K ohms resistor t…
-
### Describe the Bug
When using this mod in a build that you want to reproduce with a Create Schematic, the schematic cannot be used and causes a stack trace to be printed by Create with a warning.…
-
Where are the schematics for this particular card?
I am looking to figure out how to adapt this stuff to proprietary XT hardware such as the Toshiba series laptops, but I dont see any schematics a…
-
En este apartado buscamos exponer todo lo relacionado con el Hardware de nuestro proyecto, se incluira un diagrama esquematico que muestra como se conectan los componentes con la placa, como asi un li…
-
A bug was found in the `instances` variation when trying to:
- set `provider_visability` to private (which is the DA default now)
- configure event notifications in ICL
We should updated the `Tes…
-
I have schematics for the robonii, and a bootloader.
Let me know if you want to chat
Tkunneke@gmail.com
-
Can you please publish PCB schematics in editable format to allow for PCB tunning?
Thanks.