-
### Current Features
this driver depends on stm32 HAL
### Desired Additional Features
We want these to work with all potential hardware. This involves replacing HAL specific code with generalized c…
-
Hello,
i'm currently struggling to get my sht30 sensor up and running. I bought [this sensor](https://www.adafruit.com/product/4099) and i'm following [this guide](https://learn.adafruit.com/adafru…
-
### Description
Validate IMU
### Acceptance Criteria
IMU works
### Proposed Solution
Pending hw test driver and monitor, fix bugs and push yaml as well.
-
Sensor_SHT85 is tested for a single sensor - my test hardware is a SHT30 shield plugged into an Lolin D1 mini, using its default address of 0x45
It would be a more generically useful module if it c…
-
>>> temperature, humidity = sensor.measure()
Traceback (most recent call last):
File "", line 1, in
File "sht30.py", line 136, in measure
File "sht30.py", line 100, in send_cmd
TypeError: …
-
Part of #20
The node needs to connect to a MQTT broker and send/receive messages from it.
There are a LOT of MQTT libraries, and its not clear which is the best - comments are welcome.
My …
-
Hi can you help me how should I compose a write_i2c_block_data in order to execute a commands shown here:
https://ibb.co/GWZjSqq
The problem I find is the array of data I want to send. For example w…
g3d12 updated
3 years ago
-
For some reason this library does not work with every SHT30 sensor (3 sensors of 8 were working with this library) on a wemos D1 mini shield which can be found here:
[Wemos D1 SHT30 shield](https:/…
-
Hi Roberto and Matthew
I don't know if I'm correct making an issue on Github for this when running into the above problem. Otherwise tell me where to put it correctly.
I tried to get the [Adafru…
-
### The problem
Trying to get values from m5stack EnvII sensor that contains bmp280 and sht30 sensors. Having i2c set up with scan enabled. It can see device with address 0x44. But when sht3xd tries …