-
Hello, my gridtie works in PV mode up to 1200W, but here I can't make it work in any way, if I choose any of the PV modes it resets the inverter's output power, and in battery mode it is limited to 90…
-
Extend the WiFi dongle page by a "How to flash the alternative firmware" paragraph.
1. Backup the stock firmware
2. Flash the alternative firmware: `esphome run esp8266-wifi-dongle-example.yaml`
…
-
Hello o have a bunch of 36v lithio batteries and wnat to make usefulk on my solar system. I saw this inverter grid tie with limiter that are perfect except for the fact that is wired limited an my inv…
-
![image](https://github.com/user-attachments/assets/47f507ad-3c76-4db4-a025-b315881846fb)
I am using a Shelly EM1 to get my Mains power draw, and that is being received by a D1 Mini Esp32 (probably a…
-
Good morning,
This is less of an issue for me and more of a question regarding the starting temperature of the fan.
Your code shows an active fan from 45°C. In my case, however, the fan switches t…
-
Excellent project!
Since it could have interesting industrial uses, it would be important to add Modbus access.
-
See #45. Mention the pinout of the TTL-WIFI connector: 5V, TX, RX, GND
syssi updated
2 years ago
-
Hello to all :)
I have a problem with overshooting very frequent, I tried to change many settings in esphome but without results :/
I have 3 inverters with 1 rs485 bus for to sync them, esp32 mini…
-
Hello,
probably, this shoud be a small operation in modifying the Code:
Making the buffer available as HomeAssistant sensor would be a great way to control the Einspeisung or modify the behavior, …
-
![image](https://user-images.githubusercontent.com/19148189/180763401-a1cca267-032c-4d25-a5c2-e632f8fae24b.png)
please see above
this is also being carried through into home assistant too.