-
With PR #72991, the SPI driver does not work with PM device + runtime features enabled.
The bug was reproduced on the STM32WL device.
Steps to reproduce:
1. In `samples/subsys/lorawan/class_a…
-
### Description
Non-word writes to the SPI Device SRAM cause a store fault. We can write unaligned data by manually masking the bits, but in the a0 [revision](https://github.com/lowRISC/opentitan/blo…
-
Using commit b0af377 I built an ESP32-S3 binary and attempted to create a second `SPI.Device` for using with the XPT2046 touch device, but the program hangs when attempting to instantiate it.
```
…
-
I have a small board that has 2 devices attached to the same SPI bus
* AD9833 DDS that uses SPI MODE 2
* MCP41010 Digital Potentiometer that can use SPI MODE 0 or MODE 3
Each device has its own C…
-
Procedure:
1) Insmod Kernel Module
`insmod esp32_spi.ko`
2) Wait for ESP Device handshaked success!
3) Remove Kernel Module
`rmmode esp32_spi.ko`
Device Driver hangup at step https://github.c…
-
Doing some high-voltage device, which sometimes put display down, on ESP32 connection using SPI.
ESP32 doesn't rebooting, so it's only display problem.
Not problem of your library, but have a ques…
-
Hello!
I am trying to get papertty-init to run on my Pi4,. I am using a fresh install of Raspberry Pi OS Lite and [this](https://www.amazon.com/dp/B07Z25LWTS) e-ink display. I have ran papertty-ini…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…
-
### The problem
While trying to configure a SPI bus on an ESP32S2 using the Arduino framework the build fails due to VSPI not being defined for this platform. For ESP32S2 and ESP32S3 FSPI needs to be…
-
Are there any plans to add SPI support for communicating with your short-range devices (e.g. NINA-W156)? Maybe there is another library that uBlox has to already support this?
Thanks :)