-
I'd like to place whole image on the external SPI flash and to do so I've done some changes.
According to the official documentation I've added to the u-boot config these lines
```
CONFIG_SPL_SPI_S…
-
If I build litex with the option --with-spi-flash, the flash returns all 0xff
I then uncommented the line #define SPIFLASH_DEBUG in spiflash.c and re-built.
On boot up I got the following:
```…
-
### The problem you're addressing (if any)
Right now flashrom will print a warning if a protected range is set, but attempt to flash anyway. This may lead to issues when updating firmware.
### D…
-
I have an image generated by the Yocto, which is in .wic format.
I want to write this image to the SPI flash via the sunxi-fel tool.
Does it possible to do so?
-
### OS
Windows
### Operating System version
11
### Visual Studio Code version
1.93.0
### ESP-IDF version
1.8.1
### Python version
3.12.2
### Doctor command output
--------------------------…
-
**Describe the bug**
https://github.com/zephyrproject-rtos/zephyr/commit/adedf14c42594d167cb8f12855f7ae6097e285f1 added flags for `struct spi_nor_config` to check if among other things "requires_ulbp…
-
Have to further investigate.
LCD always works, Flash Chip only works if LCD is not connected and LCD Driver is not activated or Flash comes first in Init. (Not yet tested if it only works on init ti…
-
**Describe the bug**
When writing to SPI flash on the ESP32_DevKitC_WROVER, the device will crash when executing the UART interrupt (e.g. servicing the shell or logging system). The UART interrup…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hello.
I’m facing the same problem with nvs_get_blob and nvs_get_str, related in #8271.
I’m using the workaround proposed by Igrr, that is used in API Application Example also: https://docs.espressi…