-
### Feature
Provide some options for the stepper
- Set an icon per step (to replace the step number)
- To allow showing a checkmark (or other icon) on completed steps
- Allow clicking on 'future' …
-
**Is your feature request related to a problem? Please describe.**
As of now we don't have stepper component. This component is very useful for application where we have to show multi step forms. We …
-
This experiment on the stepper framework is currently running pbxNRc-4bM-p2.
The project thread is here pdDR7T-1BF-p2
Assuming this experiment is successful, we will convert the signup framework to s…
-
## Introduction
### Problem description
Stepper API in current state comprises of following functions for motion control:
1. [stepper_move](https://docs.zephyrproject.org/latest/doxygen/html/gr…
-
## Acceptance Criteria:
- Based on the need to show a complete status on the final step of the stepper (through a 5th hidden step), update the progress bar so that it accurately underlines the boun…
-
Ensure the spectrum is comparable in the `validation/validate_kolmogorov_spectrum.ipynb` notebook. It could be that these lines
https://github.com/Ceyron/exponax/blob/32a79b2d015374b6310ac3f42eb46d…
-
In contrary to the stock firmware, OpenQ1 does currently not disable the stepper motors after printing. That results in a power usage of around 50W idle (compared to 14W) and rather high temperatures.…
-
![image](https…
-
### Description
Design Specs: https://www.figma.com/design/jFbAR0o364WhsjELfxl2SI/branch/EfD6ayRO4unQCvdPTqxVQC/Playbook-2.0-%2F-Components?node-id=7250-4840&node-type=canvas&t=iT7RH6ejWjcX9QHJ-0
…
-
When I read the "Stepper Motor Tweaks" changes it seemed like a great idea. I purchased a very good quality 80mm fan with the same connector so no wiring changes. I printed the new mount and fitted …