-
Start.cpp says
constexpr float ReferenceTypical = 1.2f;
but the typical value for the Internal reference voltage of the STM32F303 is 1.23 V according to the datasheet. Harmless.
-
I have the feeling that this CanOpenNode library is not linked to the CanOpenNode project so the library is totally out of date compared to the original one.
It is a pity, we are missing all the im…
-
### Zig Version
0.11.0
### Steps to Reproduce and Observed Behavior
When running Microzig on an STM32F3DISCOVERY board, so with `-target thumb-freestanding-eabi -mcpu cortex_m4`, but only in …
-
Moving to STM32F722 will provide more resources (256KB RAM, 180MHz core clock) and capability for future algorithm development.
There are more EXTI vectors available (16). Would be nice to avoid an…
ajn96 updated
3 years ago
-
The following definitions should be added for STM32F303 TIM1, TIM8, TIM20:
```
TIM1:
CR2:
MMS2:
"Reset": [0b0000, "Reset - the UG bit from the TIMx_EGR register is used as trigger out…
-
### Operating System
Windows 10
### INFO_UF2.TXT
TinyUF2 Bootloader 0.18.1-55-geec497e-dirty - st/cmsis_device_f3 (v2.3.6) st/stm32f3xx_hal_driver (v1.5.6-9-g75cf4fc) tinyusb (0.15.0-566-gf1e006d09…
zvecr updated
3 months ago
-
Historically, device headers, eg stm32F303.h, have lines like this:
```
#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
#include "system_stm32f3xx.h" /* STM32F3xx…
-
Hi would this firmware work on the DS212? This device is a dual channel oscilloscope that runs on an STM32F303
-
### Brief Issue Summary
When building for baremetal arm, clang-tidy shows warnings about `size_t` and `unsigned long` compatibilty. It appears that clang-tidy thinks the target system is 64-bit like …
-
`main.rs`:
```
bind_interrupts!(struct Irqs {
I2C1_EV => i2c::EventInterruptHandler;
I2C1_ER => i2c::ErrorInterruptHandler;
});
#[embassy_executor::main]
async fn main(spawner: Spaw…