-
I had to change this line here in the display.ini to get the display to work.
From: :H,ILI9341,240,320,16,SPI,1,*,*,*,*,*,*,*,40
To: : H,ILI9341,**320,240**,16,SPI,1,*,*,*,*,*,*,*,40
Before:
![P…
-
Good evening, I used the compiled version "esp32-2432s028r_full_4MB_v0.7.0-rc9_c200edf" correctly on my device, now I have updated to the rc12 version but unfortunately I have display problems on the …
-
The driver is not working properly, the display is rotated and the colors are not the same.
Where can I find 2432S028C?
-
Hi Folks,
i just got my new Display i think its a new revision of the 4827S043C.
details of the board in my other post:
https://github.com/HASwitchPlate/openHASP/issues/713
Arduino_DataBus b…
-
The page https://openhasp.haswitchplate.com/0.7.0/hardware/sunton/esp32-3248s035/ says
> The ESP32-3248S035 boards all come with an integrated ESP32-S3 chip, 16 MB flash and 8 MB PSRAM
But furt…
-
### Perform all steps below and tick them with [x]
- [x] Check the related part of the [Documentation](https://www.openhasp.com/)
- [x] Update openHASP to the latest version
- [x] Reproduce the…
-
I try to get Xila running on my Sunton ESP32-8048S043C board. I believe it has the same hardware for display, touch and sd card. The screen resolution is 800x480, identical to the ESP32-8048S070 which…
-
Hi,
Is there anything you forgot to mention with your setup ?
I copied your repo and downloaded the libraries.
Visual Studio Code compiles it fine, but the linking fails. This is the error I get : …
-
I have a board with SD card so I hacked this repository locally to add the SDCard as a source of images.
I dont feel to much comfortable to pull a request but to send the changed code in 3 main files…
-
After much frustration I have finally worked out the problem and solution.
The GT911 really needs the INT pin connected, this is used to set the I2C address of the chip on bootup, then can be used …