-
I have a custom PCB based on A133 SoC with eMMC. Currently am trying to flash the device using sunxi-fel based on https://github.com/linux-sunxi/sunxi-tools/pull/192 and it resets the device. Also am …
-
I'm trying to get this meta layer running on an A20 Board. Unfortunately, the Board uses NAND Flash. Thus, I need to use the legacy kernel.
Is the legacy kernel/u-boot still supported for scarthgap…
-
`sunxi-libump` was separeted into a different repository: https://github.com/linux-sunxi/libump
It needs to be removed from `sunxi-mali-fb-git` PKGBUILD.
My naive attempt:
```
pkgbase=sunxi-mali-fb-…
-
```
[ 746.806264] sunxi-gmac 5030000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 794.934660] sunxi-gmac 5030000.ethernet eth0: Link is Down
[ 796.982767] sunxi-gmac 5030000.eth…
tonhe updated
1 month ago
-
There seems to be some consensus about having TF-A built with `SUNXI_AMEND_DTB=1` to get CPUIDLE functionality working, which should increase battery efficiency.
I couldn't see any indication that …
Strit updated
7 months ago
-
I have an image generated by the Yocto, which is in .wic format.
I want to write this image to the SPI flash via the sunxi-fel tool.
Does it possible to do so?
-
Hi there! I just upgraded the sysinfo dependency from 0.29 to 0.30.5 for[ my tool](https://gitlab.com/thomas351/rust-influxdb-udp-logger) and found that on one of my systems it now now finds a compone…
-
### Describe the bug
The olimex_a64-olinuxino and olimex_a64-olinuxino-emmc devices (and probably others) lack dependencies for building arm-trusted-firmware-sunxi-a64.
### OpenWrt version
r2…
-
in first boot, my devices are recognized a full speed usb device OHCI, after boot process,if i remove and insert the usb device, recognized at high speed usb device 480M EHCI. after many time, kernel …
-
Hello
Cubieboard 4 does not start, as seen in the log below:
U-Boot SPL 2024.04johang-dirty (Jul 01 2024 - 02:33:09 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
U-Boot 2024.04johang-dirty…