-
I am running tasmota 13.2.0, I want to upgrade to the latest version but doing it from tasmota UI does not upgrade. I am using OTA URL
https://github.com/xsp1989/ZB-GW03_firmware/blob/master/tasmota/…
-
### Plugin Name
homebridge-tasmota
### Plugin Icon
![Tasmota](https://github.com/homebridge/verified/assets/19808920/6d9b03d0-f175-4ac1-a366-ad812a1df0e5)
-
Hello,
I would like to integrate the esxp1302 code with Tasmota to take the benefits of sending any data over MQTT with 8-channel LORA.
Tasmota has already this capability, named bridge, but for si…
-
Im Building with Tasmota firmware flashed Plugs a Battery Warning Lamp.
If the battery State is Low send Http command On...
It Would be Nice to have feddback like power measure or states.
and Swi…
-
In tasmota there is a hue bridge (tasmota/tasmota_xdrv_driver/xdrv_20_hue.ino) which allows the device to be discovered by alexa.
At the moment my solution is to use a limitted voice command set whic…
-
# tasmota information
```
* version: Tasmota 14.1.0 (release-bluetooth)
* ota url: http://ota.tasmota.com/tasmota32/release/tasmota32-bluetooth.bin
```
# Error on boot
`09:33:52.598 BRY: faile…
-
When VenusOS started using FlashMQ, it seemed like a good idea to transfer all MQTT related communication to VenusOS given that FlashMQ is supposed to a high-performance MQTT broker (and you ideally w…
-
Some dependency seems to be missing.
I will try to compile locally without docker support. Maybe this gives me a hint which dependency is missing in tasmocompiler.
Compiling .pio/build/tasmota32-…
-
# Unlock the Full Power of Cheap Smart Plugs with Tasmota
Learn how to install open source firmware on a cheap Emporia smart plug in order to unlock its full potential.
[https://blog.horner.tj/empor…
-
I have wired all components as per schematic, I then tried integrating using ESPhome, however after a failed attempt I read that the DRV8825 is unsupported by ESPhome, SO that means I need to go ardui…