-
First of, thanks for the amazing work with this library!
I'm trying to get StallGuard to work with a TMC5161 from BGT (this one: https://raw.githubusercontent.com/bigtreetech/BIGTREETECH-TMC5161-V1.0…
totum updated
4 years ago
-
Hi Guys,
I am trying to get my 4-Axis SPI CNC controller board V1.3 board to function with a set of TMC5161 drivers I bought from Bigtreetech and some Nema23 motors (2.80A/phase) for my CNC project…
-
I have encountered a problem, I use the latest marlin firmware and 5160 is OK on my motherboard. The configuration is not changed, only the drive is changed to 5161, and the information displayed usin…
-
Using the BTT TMC5161 v1.1 sticks on a BTT SKR v1.4 and SKR Pro v1.1.
In both situation the TMC5161 driver recognizes a stall and shuts down...
With the same settings a TMC5160 stick works just …
-
Hello,
I tried several examples and different parameters on the examples provided, and none of them allowed me to reach the 1/3 of the motor speed.
At this time, I'm running the driver TMC5161 f…
-
As per https://github.com/MarlinFirmware/Marlin/issues/16365, the 5161 stepper drops out when issuing motion commands to other steppers, or when you attempt to change the direction.
The hw address …
XBrav updated
4 years ago
-
Hello, first, sorry for my bad english, but I've some issues i don't understand.
I've got a 3d-Printer with the BTT SKR Pro V1.1
I've installed 4x TMC5161 and configured them as followed:
Confi…
-
Hi!. I am experimenting with TMC5161 drivers, on a breadboard setup running an ESP32 with the I2S expanders.
I have just about everything else working, i can control dumb drivers just fine, but …
-
Hi!. I am experimenting with TMC5161 drivers, on a breadboard setup running an ESP32 with the I2S expanders running Marlin
I have just about everything else working, i can control dumb drivers just…
-
hello, this is not an issue but i didn't know where else to ask. I saw you added support for 5160 and i was wondering if the differences are big and weather the code for 2130 could work for at least b…