-
### The problem
Same issue as https://github.com/home-assistant/core/issues/105146, unfortunately there the conversation is locked.
@Bohreromir @bieniu @chemelli74
I'd like to reopen this issue …
-
Hi,
it would be great to add support for a Toggle Helper to any single TRV added to a Better Thermostat Group, to make temporary ignore a single TRV and use it manually, like TRV was not added to Bet…
-
I've added a GW3 to my setup with 2 BLU TRVs connected to it. I see the GW added in MQTT, but the TRVs are not showing up.
Here is my config:
```
device_ids: # enter the list of device IDs (…
-
### Prerequisites
* [ TS0601 TZE200_hue3yfsn] Model name of your Devices
### Description
I use a lot of these devices in combination with BT.
In the living room, there are four of the dev…
-
### Problem description
I've just bought a Moes ZigBee TRV (see [here](https://www.aliexpress.com/item/1005006068601747.html)), However, when I try to add it to my ZHA ZigBee network, although it's…
-
### Prerequisites
* Sonoff TRVZB
### Description
BT instance is disabled if you physically click the button on TRV associated with it because clicking on Sonoff TRVZB TRV switch it from "he…
-
### Problem description
Tuya TRV not Recognized by zha
same design as _TZE200_yw7cahqs
### Solution description
adding a quirk for this device
### Screenshots/Video
Screenshots/Video
[Paste…
-
## What is the feature?
### Description
Because the Tado TRV calibrates after each offset setting, this causes excessive battery consumption and more noise. In the current BT version, offset cal…
-
I have an Intergas boiler, and it is "opentherm-ready", so i am thinking of getting the opentherm-thermostat2 along with some TRV's but i'm struggling to figure out exactly how all these components wo…
-
### Prerequisites
* Avatto ME167 https://www.zigbee2mqtt.io/devices/ME167.html#avatto-me167
* [ ] Output from Home Assistant Developer Tools state e.g.
* [ ] Output from Home Assistant Device Dia…