-
I try to validate the project with the credentials I use with the Max-Plastix code but I can't get the TTGO to link to the helium network.
I see that the parameterization is for USE_ABP and for heliu…
-
There is a new board version TTGo T-Beam V1.0 which is not supported by this repository because:
- GPS Pins changed
- A Programmable power supply was added (AXP192) which has to be told to turn on t…
EccoB updated
4 years ago
-
Hi,
I just found your great project and I'm going to use it as a starting point on my LORA futzing. Alas, I've just ordered my TBEAMs from china and begun refactoring to allow me to use the axp192…
-
I installed a 28db gain GPS antenna on my TTGO Tbeam module connected via USB to a Raspberry Pi for Stratux. After a few minutes of use after receiving a position, the TTGO shuts down. I have to reboo…
-
Hello DL9RDZ, please, would it be possible to add support for a piezzo passive buzzer on TBeam and wifi-only TTGO? Make the buzzer beep when is the module able to decode the sonde?
-
I may just be blind, but I could not find out how to set to eu_868, it would always default to us and if you change the build_flags option in the platformio.ini it would just throw errors, so I found …
-
Seems newer T-BEAM boards (sometimes calls V1.2 but mine's marked V1.1) have a new PMU chip, APX2102 instead of APX192.
The symptoms are that transmission never starts, it's as if the transmitter i…
-
I downloaded the app and flashed the RippleV5-Bluetooth-TBeam.bin on a T-beam as I believed it is for using a t-beam as a home unit. Unfortunately I cannot get it to work. Do I have to buy a TTGO LoRa…
-
I installed your code in my TTGO TBEAM (T22 v1.0 20190612), change the ID TTN data and can see new data arriving in TTN console.
But the data arrived to TTN console only has the gateway information,…
-
On https://meshtastic.org/docs/hardware/devices/lilygo/tbeam/ the flashing instructions are as follows:
```
The following process will manually place the device into the Espressif Firmware Download …