-
Close when can successfully read ALL data from codeplug that is visible in Tytera CPS V1.30
m0ivq updated
8 years ago
-
I am using the latest version of the virtual machine and virtual box. I am running it on mac sierra, 10.12.16. I have no trouble flashing the firmware. On trying to flash an update to the userdb, I a…
-
IDK if this will help you make moto BP work with Tytera EP, but here are some of the outputs from Moto BP keys. Maybe you can see if you can match this to a Tytera:
Moto BP key# / 16 bit key/ First…
-
If the name (corresponding to the id), IN THE INTERNAL CONTACT LIST OF THE DEVICE, is long 16 bytes, when firmware reads it, it not founds the terminating 0 (nul) byte (I think) and then, when the nam…
-
From the normal interface, with Netmon enabled, sometimes if I hit the asterisk key to check the detailed info of the last caller, the display gets stuck on that page.
-
It's possible to connect to the DFU driver directly, without STDFU.dll and STTubeDevice30.dll. See my C implementation as an example: https://github.com/sergev/dmrconfig/blob/master/dfu-windows.c
-
After writing to my TYT MD-UV390 (non-GPS), the PTT is the only button that is working. I've experimented with the extension section of qDMR, attempting to assign ScanToggle to the various buttons but…
-
While being in scan mode, by entering the red button menu, scan mode is still on and the active channel gets displayed.
After exiting the menu by pressing the red button again or exiting by navigatin…
-
hello everybody,
who can say me where find the communication protocol between TYT and computer through USB for the user database implantation?
I would try to make a software on Windows OS :-)
…
ghost updated
6 years ago
-
Dear Developer,
i'm testing the MD380G Radio and found some iusse on it .
Some i solved changing the GPS antenna , but other is not simple to solve because my opinion is that on GPS there isn't the …