-
would u be able to use a pwnagotchi with a Waveshare eInk 2.13" v4?
-
Is badgy supported by esphome? Does anyone have config files if so?
@chunkysteveo you tagged a post with `esphome` [here](https://www.instagram.com/p/CgJeIZorzWx/)
The waveshare eink displays se…
-
Could not run / compile
what did I wrong ?
here is what I did:
$ git clone https://github.com/boustrophedon/eink-esp-weather-display/
$ cd eink-esp-weather-display/esp
$ . ~/export-esp.sh
…
-
I strictly followed the READMEs. However, the waveshare screen did not light up and erorr occured as below:
![image](https://github.com/user-attachments/assets/eed96ff8-6348-4160-8146-1b09428a73b0)
…
-
### The problem
esp32:
board: esp32dev
framework:
type: arduino
pi:
clk_pin: 13
mosi_pin: 14
display:
- platform: waveshare_epaper
id: eink
cs_pin: 15
dc_pin:…
-
**Describe the bug**
RPI is booting up, display doesn't refresh, while going through the logs it says "Initializing waveshare v2 display" and that's it.
As of yesterday everything was working fine, …
-
**Describe the problem you have/What new integration you would like**
Please add 1.54in(b) to Waveshare E-Paper Display supported models - similar to how it was done in #892 for 2.9 model.
It'…
-
**Actual Behavior:**
Currently the LightningATM works only with one screen - PaPiRus Zero - ePaper / eInk Screen (display.py). It is hard to procure and expensive.
**Expected Behavior:**
The ATM…
-
As a previous pull request was taking too much time, combined with development of this display, this is pulled separate to be done when possible (a work in progress, already)
-
**Describe the problem you have/What new integration you would like**
I would like to be able to use the GDEH0154D67 eink display ([here](https://www.good-display.com/product/208.html) and [h…