-
First thanks for a great application!
This is related to #2 and similar in nature.
The BMW / Mini integration uses a selection list to set the charging current in steps of 1 A
https://www.home-…
-
### Bambu Studio Version
latest as 05.10.24
### Where is the application from?
Bambu Lab Official website
### OS version
windows 10
### Additional system information
![2](https://github.com/use…
-
Hi raenji-sk,
does your flow work actually with your setup?
Trying to find a SmartMeter Emulator / Gateway to use my SMD72 instead of the SDM630 for my X1-Mini
Got Homeassistant working alrea…
-
I couldn't get the HA SolaX integration to load reliably, so tried some tests by calling the solax functions directly from Python using the test code from the front page of this repo.
I have two in…
-
### Bambu Studio Version
1.9.3.50
### Where is the application from?
Bambu Lab Official website
### OS version
Windows 10
### Additional system information
_No response_
### Printer
Bambu Lab…
-
Hi @squishykid,
I have lookup tables to decode data for following models:
- X1-Hybiyd/Fit
- X1-Boost/Air/Mini
- X3-Hybiyd/Fit
- X3-20K/30K
- X3-MIC/PRO
- X1-Smart
- X1-AC
- A1-Hybrid
- A1-…
-
Hi @Innixma
When 'n_train_subsmaple' is set to 5000, and the number of train_data is larger than 5000, say, 40000, the following error is reported.
### **Error messages**
File "C:\miniconda…
-
Some RS485 to UART module use the DE/RE flow control pin. However only TX/RX is used currently, meaning in cannot work with the MAX485 one.
This issue is similar to https://github.com/syssi/esphome…
-
Hi everyone, I have a question regarding to the operations after enabling USE_MINI_MASK:
In `detection_targets_graph`,
```
if config.USE_MINI_MASK:
# Transform ROI coordinates from norma…
-
### Bambu Studio Version
1.7.6.92
### Where is the application from?
Bambu Lab Official website
### OS version
Windows 10
### Additional system information
_No response_
### Printer
X1 Carbon…